D-Blaze Fire Retardant Treated (FRT) Wood is a new generation construction material for weather-protected applications.  D-Blaze treated lumber and plywood are highly effective in controlling the spread of flame, smoke and devastation caused by fire. Its extremely low hygroscopic and corrosive properties make it a superior choice for use whenever FRT wood is required.
D-Blaze Products Are:
  • Approved by major building codes and insurance rating bureaus.
  • Tested and certified by Underwriters Laboratories (UL).
  • Carries an "FRS" rating under UL classification, exhibiting a flame spread and smoke rating of 25 or less.
  • D-Blaze treated products show no evidence of significant progressive combustion at 30 minutes exposure to flame.
  • UL testing for hygroscopicity has resulted in D-Blaze being classified as a Type A fire retardant as defined in AWPA Standards C-20 and C-27.
Recommended and Typical Uses:
  • Roof Trusses
  • Roof Decks & Sheathing
  • Beams & Purlins
  • Floor Trusses
  • Sub flooring
  • Joists
  • Extexior Load-bearing Walls
  • Studs
  • Architectural Millwork & Trim
  • Blocking & Furring
  • Paneling
  • Interior Nonload-bearing Partitions
To Locate Retailers and/or Distributors in Your Area Call or Email Us

For more detailed information, including product brochures, visit www.treatedwood.com or contact Quality Forest Products directly.
Close Window Next -->
Updated October, 2002 © 2001, 2002 QUALITY FOREST PRODUCTS, Inc
The D-Blaze logo is a reserved trademark of Chemical Specialties, Inc. (CSI)
used here with permission.  Much of the information provided here is courtesy of CSI Product Information.